You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
98 lines
5.1 KiB
98 lines
5.1 KiB
//-----------------------------------------------------------------------------
|
|
// ATMEL Microcontroller Software Support - ROUSSET -
|
|
//-----------------------------------------------------------------------------
|
|
// DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
|
// IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
// MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
|
// DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
// OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
// EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
//-----------------------------------------------------------------------------
|
|
// File Name : Cstartup_SAM7.c
|
|
// Object : Low level initialisations written in C for Tools
|
|
// For AT91SAM7X256 with 2 flash plane
|
|
// Creation : JPP 14-Sep-2006
|
|
//-----------------------------------------------------------------------------
|
|
|
|
#include "project.h"
|
|
|
|
|
|
// The following functions must be write in ARM mode this function called
|
|
// directly by exception vector
|
|
extern void AT91F_Spurious_handler(void);
|
|
extern void AT91F_Default_IRQ_handler(void);
|
|
extern void AT91F_Default_FIQ_handler(void);
|
|
|
|
//*----------------------------------------------------------------------------
|
|
//* \fn AT91F_LowLevelInit
|
|
//* \brief This function performs very low level HW initialization
|
|
//* this function can use a Stack, depending the compilation
|
|
//* optimization mode
|
|
//*----------------------------------------------------------------------------
|
|
void AT91F_LowLevelInit(void) @ "ICODE"
|
|
{
|
|
unsigned char i;
|
|
///////////////////////////////////////////////////////////////////////////
|
|
// EFC Init
|
|
///////////////////////////////////////////////////////////////////////////
|
|
AT91C_BASE_MC->MC_FMR = AT91C_MC_FWS_1FWS ;
|
|
|
|
///////////////////////////////////////////////////////////////////////////
|
|
// Init PMC Step 1. Enable Main Oscillator
|
|
// Main Oscillator startup time is board specific:
|
|
// Main Oscillator Startup Time worst case (3MHz) corresponds to 15ms
|
|
// (0x40 for AT91C_CKGR_OSCOUNT field)
|
|
///////////////////////////////////////////////////////////////////////////
|
|
AT91C_BASE_PMC->PMC_MOR = (( AT91C_CKGR_OSCOUNT & (0x40 <<8) | AT91C_CKGR_MOSCEN ));
|
|
// Wait Main Oscillator stabilization
|
|
while(!(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MOSCS));
|
|
|
|
///////////////////////////////////////////////////////////////////////////
|
|
// Init PMC Step 2.
|
|
// Set PLL to 96MHz (96,109MHz) and UDP Clock to 48MHz
|
|
// PLL Startup time depends on PLL RC filter: worst case is choosen
|
|
// UDP Clock (48,058MHz) is compliant with the Universal Serial Bus
|
|
// Specification (+/- 0.25% for full speed)
|
|
///////////////////////////////////////////////////////////////////////////
|
|
AT91C_BASE_PMC->PMC_PLLR = AT91C_CKGR_USBDIV_1 |
|
|
(16 << 8) |
|
|
(AT91C_CKGR_MUL & (72 << 16)) |
|
|
(AT91C_CKGR_DIV & 14);
|
|
// Wait for PLL stabilization
|
|
while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_LOCK) );
|
|
// Wait until the master clock is established for the case we already
|
|
// turn on the PLL
|
|
while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) );
|
|
|
|
///////////////////////////////////////////////////////////////////////////
|
|
// Init PMC Step 3.
|
|
// Selection of Master Clock MCK equal to (Processor Clock PCK) PLL/2=48MHz
|
|
// The PMC_MCKR register must not be programmed in a single write operation
|
|
// (see. Product Errata Sheet)
|
|
///////////////////////////////////////////////////////////////////////////
|
|
AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_PRES_CLK_2;
|
|
// Wait until the master clock is established
|
|
while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) );
|
|
|
|
AT91C_BASE_PMC->PMC_MCKR |= AT91C_PMC_CSS_PLL_CLK;
|
|
// Wait until the master clock is established
|
|
while( !(AT91C_BASE_PMC->PMC_SR & AT91C_PMC_MCKRDY) );
|
|
|
|
///////////////////////////////////////////////////////////////////////////
|
|
// Disable Watchdog (write once register)
|
|
///////////////////////////////////////////////////////////////////////////
|
|
AT91C_BASE_WDTC->WDTC_WDMR = AT91C_WDTC_WDDIS;
|
|
|
|
///////////////////////////////////////////////////////////////////////////
|
|
// Init AIC: assign corresponding handler for each interrupt source
|
|
///////////////////////////////////////////////////////////////////////////
|
|
AT91C_BASE_AIC->AIC_SVR[0] = (int) AT91F_Default_FIQ_handler ;
|
|
for (i = 1; i < 31; i++) {
|
|
AT91C_BASE_AIC->AIC_SVR[i] = (int) AT91F_Default_IRQ_handler ;
|
|
}
|
|
AT91C_BASE_AIC->AIC_SPU = (unsigned int) AT91F_Spurious_handler;
|
|
}
|
|
|