You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
266 lines
11 KiB
266 lines
11 KiB
;- ----------------------------------------------------------------------------
|
|
;- ATMEL Microcontroller Software Support - ROUSSET -
|
|
;- ----------------------------------------------------------------------------
|
|
;- DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
|
|
;- IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
;- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
|
|
;- DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
;- INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
;- LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
;- OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
|
|
;- LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
|
|
;- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
;- EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
;- ----------------------------------------------------------------------------
|
|
;- File source : Cstartup.s79
|
|
;- Object : Generic CStartup
|
|
;- 1.0 01/Sep/05 FBr : Creation
|
|
;- 1.1 09/Sep/05 JPP : Change Interrupt management
|
|
;------------------------------------------------------------------------------
|
|
|
|
;------------------------------------------------------------------------------
|
|
; Include your AT91 Library files
|
|
;------------------------------------------------------------------------------
|
|
#include "AT91SAM7X256_inc.h"
|
|
;------------------------------------------------------------------------------
|
|
|
|
;------------------------------------------------------------------------------
|
|
; ?RESET
|
|
; Reset Vector.
|
|
; Normally, segment INTVEC is linked at address 0.
|
|
; For debugging purposes, INTVEC may be placed at other addresses.
|
|
; A debugger that honors the entry point will start the
|
|
; program in a normal way even if INTVEC is not at address 0.
|
|
;------------------------------------------------------------------------------
|
|
|
|
PROGRAM ?RESET ;- Begins a program module
|
|
RSEG INTRAMEND_REMAP ;- Begins a relocatable segment
|
|
RSEG ICODE:CODE (2) ;- Begins a relocatable segment : corresponding address is 32-bit aligned
|
|
CODE32 ;- Always ARM mode after reset
|
|
ORG 0 ;- Sets the location counter: corresponds to the RESET vector address
|
|
|
|
;------------------------------------------------------------------------------
|
|
;- Exception vectors
|
|
;------------------------------------------------------------------------------
|
|
;- These vectors can be read at address 0 or at RAM address
|
|
;- They ABSOLUTELY requires to be in relative addresssing mode in order to
|
|
;- guarantee a valid jump. For the moment, all are just looping.
|
|
;- If an exception occurs before remap, this would result in an infinite loop.
|
|
;- To ensure if a exeption occurs before start application to infinite loop.
|
|
;------------------------------------------------------------------------------
|
|
|
|
reset
|
|
B InitReset ; 0x00 Reset handler
|
|
undefvec:
|
|
B undefvec ; 0x04 Undefined Instruction
|
|
swivec:
|
|
B swivec ; 0x08 Software Interrupt
|
|
pabtvec:
|
|
B pabtvec ; 0x0C Prefetch Abort
|
|
dabtvec:
|
|
B dabtvec ; 0x10 Data Abort
|
|
rsvdvec:
|
|
B rsvdvec ; 0x14 reserved
|
|
irqvec:
|
|
B IRQ_Handler_Entry ; 0x18 IRQ
|
|
|
|
fiqvec: ; 0x1c FIQ
|
|
;------------------------------------------------------------------------------
|
|
;- Function : FIQ_Handler_Entry
|
|
;- Treatments : FIQ Controller Interrupt Handler.
|
|
;- Called Functions : AIC_FVR[interrupt]
|
|
;------------------------------------------------------------------------------
|
|
|
|
FIQ_Handler_Entry:
|
|
|
|
;- Switch in SVC/User Mode to allow User Stack access for C code
|
|
; because the FIQ is not yet acknowledged
|
|
|
|
;- Save and r0 in FIQ_Register
|
|
mov r9,r0
|
|
ldr r0 , [r8, #AIC_FVR]
|
|
msr CPSR_c,#I_BIT | F_BIT | ARM_MODE_SVC
|
|
;- Save scratch/used registers and LR in User Stack
|
|
stmfd sp!, { r1-r3, r12, lr}
|
|
|
|
;- Branch to the routine pointed by the AIC_FVR
|
|
mov r14, pc
|
|
bx r0
|
|
|
|
;- Restore scratch/used registers and LR from User Stack
|
|
ldmia sp!, { r1-r3, r12, lr}
|
|
|
|
;- Leave Interrupts disabled and switch back in FIQ mode
|
|
msr CPSR_c, #I_BIT | F_BIT | ARM_MODE_FIQ
|
|
|
|
;- Restore the R0 ARM_MODE_SVC register
|
|
mov r0,r9
|
|
|
|
;- Restore the Program Counter using the LR_fiq directly in the PC
|
|
subs pc,lr,#4
|
|
|
|
;------------------------------------------------------------------------------
|
|
;- Manage exception: The exception must be ensure in ARM mode
|
|
;------------------------------------------------------------------------------
|
|
;------------------------------------------------------------------------------
|
|
;- Function : IRQ_Handler_Entry
|
|
;- Treatments : IRQ Controller Interrupt Handler.
|
|
;- Called Functions : AIC_IVR[interrupt]
|
|
;------------------------------------------------------------------------------
|
|
IRQ_Handler_Entry:
|
|
|
|
;-------------------------
|
|
;- Manage Exception Entry
|
|
;-------------------------
|
|
;- Adjust and save LR_irq in IRQ stack
|
|
sub lr, lr, #4
|
|
stmfd sp!, {lr}
|
|
|
|
;- Save r0 and SPSR (need to be saved for nested interrupt)
|
|
mrs r14, SPSR
|
|
stmfd sp!, {r0,r14}
|
|
|
|
;- Write in the IVR to support Protect Mode
|
|
;- No effect in Normal Mode
|
|
;- De-assert the NIRQ and clear the source in Protect Mode
|
|
ldr r14, =AT91C_BASE_AIC
|
|
ldr r0 , [r14, #AIC_IVR]
|
|
str r14, [r14, #AIC_IVR]
|
|
|
|
;- Enable Interrupt and Switch in Supervisor Mode
|
|
msr CPSR_c, #ARM_MODE_SVC
|
|
|
|
;- Save scratch/used registers and LR in User Stack
|
|
stmfd sp!, { r1-r3, r12, r14}
|
|
|
|
;----------------------------------------------
|
|
;- Branch to the routine pointed by the AIC_IVR
|
|
;----------------------------------------------
|
|
mov r14, pc
|
|
bx r0
|
|
|
|
;----------------------------------------------
|
|
;- Manage Exception Exit
|
|
;----------------------------------------------
|
|
;- Restore scratch/used registers and LR from User Stack
|
|
ldmia sp!, { r1-r3, r12, r14}
|
|
|
|
;- Disable Interrupt and switch back in IRQ mode
|
|
msr CPSR_c, #I_BIT | ARM_MODE_IRQ
|
|
|
|
;- Mark the End of Interrupt on the AIC
|
|
ldr r14, =AT91C_BASE_AIC
|
|
str r14, [r14, #AIC_EOICR]
|
|
|
|
;- Restore SPSR_irq and r0 from IRQ stack
|
|
ldmia sp!, {r0,r14}
|
|
msr SPSR_cxsf, r14
|
|
|
|
;- Restore adjusted LR_irq from IRQ stack directly in the PC
|
|
ldmia sp!, {pc}^
|
|
|
|
|
|
|
|
InitReset:
|
|
|
|
;------------------------------------------------------------------------------
|
|
;- Low level Init is performed in a C function: AT91F_LowLevelInit
|
|
;- Init Stack Pointer to a valid memory area before calling AT91F_LowLevelInit
|
|
;------------------------------------------------------------------------------
|
|
|
|
;- Retrieve end of RAM address
|
|
__iramend EQU SFB(INTRAMEND_REMAP) ;- Segment begin
|
|
|
|
EXTERN AT91F_LowLevelInit
|
|
ldr r13,=__iramend ;- Temporary stack in internal RAM for Low Level Init execution
|
|
ldr r0,=AT91F_LowLevelInit
|
|
mov lr, pc
|
|
bx r0 ;- Branch on C function (with interworking)
|
|
|
|
;------------------------------------------------------------------------------
|
|
;- Top of Stack Definition
|
|
;------------------------------------------------------------------------------
|
|
;- Interrupt and Supervisor Stack are located at the top of internal memory in
|
|
;- order to speed the exception handling context saving and restoring.
|
|
;- ARM_MODE_SVC (Application, C) Stack is located at the top of the external memory.
|
|
;------------------------------------------------------------------------------
|
|
|
|
IRQ_STACK_SIZE EQU (3*8*4) ; 3 words to be saved per interrupt priority level
|
|
ARM_MODE_FIQ EQU 0x11
|
|
ARM_MODE_IRQ EQU 0x12
|
|
ARM_MODE_SVC EQU 0x13
|
|
I_BIT EQU 0x80
|
|
F_BIT EQU 0x40
|
|
|
|
;------------------------------------------------------------------------------
|
|
;- Setup the stack for each mode
|
|
;------------------------------------------------------------------------------
|
|
ldr r0, =__iramend
|
|
|
|
;- Set up Fast Interrupt Mode and set FIQ Mode Stack
|
|
msr CPSR_c, #ARM_MODE_FIQ | I_BIT | F_BIT
|
|
;- Init the FIQ register
|
|
ldr r8, =AT91C_BASE_AIC
|
|
|
|
;- Set up Interrupt Mode and set IRQ Mode Stack
|
|
msr CPSR_c, #ARM_MODE_IRQ | I_BIT | F_BIT
|
|
mov r13, r0 ; Init stack IRQ
|
|
sub r0, r0, #IRQ_STACK_SIZE
|
|
|
|
;- Enable interrupt & Set up Supervisor Mode and set Supervisor Mode Stack
|
|
msr CPSR_c, #ARM_MODE_SVC
|
|
mov r13, r0
|
|
|
|
;------------------------------------------------------------------------------
|
|
; Initialize segments.
|
|
;------------------------------------------------------------------------------
|
|
; __segment_init is assumed to use
|
|
; instruction set and to be reachable by BL from the ICODE segment
|
|
; (it is safest to link them in segment ICODE).
|
|
;------------------------------------------------------------------------------
|
|
EXTERN __segment_init
|
|
ldr r0,=__segment_init
|
|
mov lr, pc
|
|
bx r0
|
|
|
|
;------------------------------------------------------------------------------
|
|
;- Branch on C code Main function (with interworking)
|
|
;------------------------------------------------------------------------------
|
|
EXTERN main
|
|
PUBLIC __main
|
|
?jump_to_main:
|
|
ldr lr,=?call_exit
|
|
ldr r0,=main
|
|
__main:
|
|
bx r0
|
|
|
|
;------------------------------------------------------------------------------
|
|
;- Loop for ever
|
|
;------------------------------------------------------------------------------
|
|
;- End of application. Normally, never occur.
|
|
;- Could jump on Software Reset ( B 0x0 ).
|
|
;------------------------------------------------------------------------------
|
|
?call_exit:
|
|
End
|
|
b End
|
|
|
|
;------------------------------------------------------------------------------
|
|
;- Exception Vectors
|
|
;------------------------------------------------------------------------------
|
|
PUBLIC AT91F_Default_FIQ_handler
|
|
PUBLIC AT91F_Default_IRQ_handler
|
|
PUBLIC AT91F_Spurious_handler
|
|
|
|
CODE32 ; Always ARM mode after exeption
|
|
|
|
AT91F_Default_FIQ_handler
|
|
b AT91F_Default_FIQ_handler
|
|
|
|
AT91F_Default_IRQ_handler
|
|
b AT91F_Default_IRQ_handler
|
|
|
|
AT91F_Spurious_handler
|
|
b AT91F_Spurious_handler
|
|
|
|
ENDMOD ;- Terminates the assembly of the current module
|
|
END ;- Terminates the assembly of the last module in a file
|